Item list

Special Pro Edger【Tan】5types/ Includes: Sharpening Rod, Water resistant paper no.800, no.1200 and Polishing compound(Specially made items limited)【Specially made items】

Pro Edger Wooden Handle Tools (specially made items)

Price：

2,400JPY
2,400JPY
2,400JPY
2,400JPY
2,400JPY

Weight：

Product Number：

#8082
#8083
#8084
#8085
#8086

Spec：

Qty：

Item Name

Special Pro Edger【Tan】5types/ Includes: Sharpening Rod, Water resistant paper no.800, no.1200 and Polishing compound(Specially made items limited)【Specially made items】

Size

No.0(0.6mm)/ No.1(0.8mm)/ No.2(1.0mm)/ No.3(1.2mm)/ No.４(1.4mm) ( )=The blade width

Use

Trimming and smoothing edges of leather

Characteristics

Pro Edger No.0(0.6mm)/No1(0.8mm)/No2(1.0mm)/No3(1.2mm)/No4(1.4mm) are custom-made tools assembled on specially made wooden handle.

Polishing compound (Specially made items limited) is available as a remedy when the sharpness becomes bad.
Please use it as your own original tool that you cannot find anywhere else.

We developed this product to further evolve Edge Beveler.
It has been commonly accepted on the market that Edge Bevelers have dull blades. The finish quality of the edge is one of the most important parts for leather craft so we created these tools in response to user’s expectations.

There are some points to be considered when developing this product.
1. To make the leather edge cut in a semicircle from the beginning.
2. To make it easy to sharpen the edge by yourself.
3. The Edger Blade sharpening set should be included from the beginning.
4. increase the blade width of No.0(0.6mm)/No.4(1.4mm) to meet more detailed needs.
・
①Ebony has a natural color and the natural wooden handle can be colored in Tan, Mahogany or Walnut.
Only the Ebony handle has two lines on the lower part of the handle.
・
②The cap on the handle is made of brass. It is made by hand on a one by one basis and there is a line on it to improve the appearance.
And also, the caps are fixed with tiny nail of brass.
・
③For your reference, ③is our standard color.

How to sharpen a blade
Please refer to the videos on our Instagram/ images on our website/ banners on usage and maintenance.

How to resharpen the blade:
If you feel the blade sharpness is becoming dull, you can polish the blade part with leather sheet and polishing compound.
Rub Polishing compound and a few drops of oil on the trimmed edge of the leather sheet, put the blade part on the leather and pull off at a fixed angle and polish the blade.
If you can’t get the sharpness with the process above, you can use the attached Sharpening Rod and Water resistant paper.
Putting the paper on the Rod adding some drops of water, pulling off the blade part along the Rod and polish the blade.
If you can’t sharpen the blade well, you can use our “Resharpen blade business”.
(“Resharpen blade business” is mentioned in OKA FACTORY’s 4 commitments)