This Heatpen was selected by a factory specializing in leather craft.
Compared to other companies' products, the product accuracy and workability are outstanding.
Please compare with other products !

What do you do at the end of sewing when you cut the thread or stop the thread ?
・When you cut the thread with scissors, doesn't it come loose?
・If I sear the threads with a lighter, won't it burn the leather?
【Heatpen】can improve this problem effortlessly.

The threads are melted and cut by heat, so they do not fray.
Heats up immediately upon switch-on for outstanding workability.
The maximum temperature of 500℃ or higher allows for easy thread trimming and thread stoppage.



【Characteristics】
1.【Adoption of sliding buttons】
Power can be turned on and off with a sliding button.
It is designed to be turned on by sliding it forward with a finger and turned off by releasing it.

Push-button type of other companies' products ↓
①The touch feeling of the buttons is unstable and it is very difficult to tell whether they are on or off.
② It is very difficult to work with the button while keeping it pressed down.

Heatpen sliding type ↓
① Slide forward with the index finger, the position where it stops is ON, and when you release it, it is OFF, so it is very easy to know when it is ON and OFF.
② Even when placed in the work process, the structure is designed to push the button forward, making it very easy to work with.

Please experience the difference in workability between the push button type and the slide type buttons !



2.【Adoption of battery type】
Can be heated by 1 AA battery.

Why AA batteries are used in
① The weight of the main unit can be lightened, which makes it easy to work with.
② Easy to exchange.
③ AA batteries are universal, so they can be used anywhere in the world.



3.【About Heater Tips】
Spare【2 replacement heater tips】are included with the main unit.
There are a total of three heater tips since the purchase of the new product, so there is no need to worry about damage.
When replacing, simply hold the black part of the heater tip and pull to remove.
Other companies' products have only one Heater tip attached to the main unit.
Without spares, it is uncertain when they are damaged, and they are also more expensive.



4.【About the body and lid】
We dare to make [flat areas] on the body and lid.
This is to prevent it from rolling off the desk during work.
The tip of the product is delicate, so it was made to look like this.



5.【For examples of work】
It can be melted, baked, cut, bent, etc. with heat.
・Cut thread
・Burning leather and wood
・Cutting PET bottles
・Prastic models/ Dataching parts from a runner
It can be used for various purposes depending on your ideas.